Free Express Delivery on All Orders.
This Paintless Dent Repair T-Bar puller is a lightweight glue tab pulling tool, meant to be used when repairing pressure dents and any dent that isn't sharp or creased. The tension puller works well with a tap down hammer when pulling large dents. It's very easy to control, everyone can removal the dent easily by yourself.
Color: Silver + Blue Function: Paintless Dent Removal QTY: 19pcs
1. Clean the dent with a clean wet cloth; 2. Mount the glue stick into the glue gun, pull the trigger to let the glue stick enter into the glue gun, connect the power source and preheat for 5 minutes. 3. Use a proper drawing gasket. Large dent requires a large drawing gasket. 4. Pull the trigger and apply the drawing gasket with extruded glue. 5. Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres. 6. Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent; 7. Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen. 8. Clean the repaired place with a clean wet cloth.
1x 2 in 1 Dent Removal T Bar Tools 18x Paintless Dent Repair Glue Pulling Tabs
Forgot Password
Create New Account
Thanks for create a new account. We have already sent a confirmation email to your mailbox. Please click on the activation link to activate your account.
