LED Strip Lights RGB Multicolour Remote Atmosphere Lamp Car Interior Footwell

SKU: U4_f00twell_72led

£6.49

Free Express Delivery on All Orders.

Description

The LED strips offer a wide range of colors, allowing you to choose from various hues to match your mood or the car's interior theme.

The LED strips come with adhesive backing, making them easy to install on various surfaces inside the car.

Remote Control: Included; infrared (IR) or radio frequency (RF) remote with multiple buttons for color selection, brightness adjustment, and mode changes.

Music Mode: Built-in microphone or app feature to sync lights with music rhythms.

Adhesive Backing: 3M adhesive tape on the back of the LED strips for easy and secure installation.

Specification

Material: Flexible, Water-resistant PVC , Silicone

Strip light source RGB 5050smd LEDs

LED Count Options: 36 LED, 48 LED, 72 LED

Power Supply: USB-powered (5V/12V)

Rated Power: 12-32W

Line length: Short 1.4meters / Long 1.6meters

Power Source: USB

Number of Bulbs: 12

Light Color: White/red/blue/lemon yellow/orange/green/pink/ice blue

Brightness Control: Adjustable via remote or app.

Strip Length: Typically between 12 to 15 inches per strip

Connector Type: 4-pin connectors

Lifespan: around 10,000 to 50,000 hours.

Size:

72 LEDs = 4 x 18 LEDs per strips = 32.5cm long strips

Control: Remote

How To Use

Installation:

Step 1: Gather Your Tools

-Ensure you have everything needed: LED strips, remote control, USB power cable, and the control unit (often included in the package).

-You might also want to have some cleaning wipes handy to clean the installation area.

Step 2: Clean the Surface

-Clean the areas where you plan to install the LED strips. This ensures that the adhesive backing sticks well.

-Common locations include under the dashboard, beneath the seats, or along the door panels.

Step 3: Position the LED Strips

- Plan the positioning of the LED strips before sticking them. Make sure they won't interfere with any pedals, controls, or foot movements.

- Peel off the adhesive backing and firmly press the strips into place.

Step 4: Connect the Cables

-Connect the LED strips to the control unit using the provided connectors.

-Plug the control unit into a USB power source in your car (such as a USB port or a USB car charger).

Step 5: Secure the Wires

-Tuck away any excess wiring to prevent it from dangling or getting in the way. You can use zip ties or adhesive clips to secure the wires neatly.

Package Included

1x 72 LED/s strip

1x Music controller

1x Remote Control