HVLP Mini Gravity Feed Air Spray Paint Gun 1.0mm Nozzle Auto Car Paint Sprayer

SKU: P4_air_gun

£8.99

Free Express Delivery on All Orders.

Description

HVLP H-2008 H-827 H-2000 SPRAY GUN
Read this manual carefully and understand it completely, basic safety precaution should always be strictly followed to prevent the damage to the tool and injury to operator. Retain this manual for future reference. And you should pay more attention to the Technical Data.

Operating Instructions;
Power Source
This tool requires clean, dry and compressed air rated at a regulated pressure of 2.5-3.5 bar to operate. The compressed air contains moisture and other contaminates. Using a filter will remove most of these foreign matters. Use a filter and a pressure regulator as close to the tool as possible.
CAUTION
Air pressure should be regulated to 2.5-3.5 bar. Air pressure which is too low or too high will damage the tool and influence the painting effect.

How To Use

1. Toxic vapors produced by spraying certain materials can create intoxication and serious damage to health. Always wear protective res- pirator, eyewear and gloves to prevent toxic hazard solvent and paint coming into contact with your eyes or skin. (see fig 1)
2. Never use oxygen, combustible or any other bottle gas as an air source that could cause an explosion or serious personal injury. (see fig 2)
3. Fluid and solvent can be highly flammable or combustible. Use in well- ventilated spray booth and avoid any ignition sources such as smoking and open flames. (see fig 3)
4. Disconnect the tool from air supply hose before carrying out any tool maintenance and when not in use.
5. Use clean, dry and regulated compressed air rated at 2.5-3.5 bar, never exceed maximum operating pressure of 6 bar (see fig. 4)

6. Only use parts, nozzles and accessories recommended by the manufacturer.
7. Before operating the tool, makes sure all screws and caps are securely tightened to prevent leaking.
8. Inspect daily for free trigger movement and nozzle to ensure the tool is fully operational.
9. Never use solvent which can chemically react with aluminium and zinc parts.
10. Never modify the tool.

Package Included

1x HVLP spray gun with 1.0 mm fluid nozzle
1x 125 ml with lid Plastic cup
1x Brush
1x Wrench
1x Connector
1x Nut
1x Manual